Reasons to use Hydro Jetting for Cleaning Pipes

Inevitably, your home’s plumbing will eventually get clogged. Whether it’s hard water, flushed trash, or something else, your pipes are certain to get clogged one day. But how do you clear out a clog? Like the many ways a clog can happen, there are just as many ways to unclog your pipes. One of the more efficient methods is hydro jetting.  In hydro jetting method special cameras to look inside your pipes and see what’s blocking the pipes. Then, a blast of water ranging from 3,000 to 8,000 PSI is sprayed in. This type of blockage clearing has advantages over conventional methods.

It does thorough cleaning, not just unclogging

Accumulations of grease, silt, fats, soap, detergents, dirt, mineral deposits and other components of sludge inside the pipe are often the precursor to recurrent sewer clogs. Unfortunately, a rotating snake does little other than punch a hole in the clog to restore flow. It doesn’t address the ongoing issues of sludge that are likely to result in a recurrence very soon.

 Hydro-Jetting cleans the internal pipe for a more long-lasting resolution. High pressure Hydro-Jetting can also be used to remove roots in drains by using specialized cutting tools driven by the water jets. Hydro-Jet cleaning is ideal for sewer lines, kitchen blocked drains, laundry lines, tubs, showers, lavatory sinks and floor drains.

Efficient for stubborn clogs

Hydrojetting in Chatsworth is more efficient than many other drain cleaning methods. It has the ability to penetrate deeper into built up debris, and flush out roots, rocks, minerals, and any other obstructions that can clog up and get caked onto your pipes. Hydro-Jets come in different sizes, so an experienced plumber can determine the appropriate pressure force to remove debris without damaging the pipes.

Removes bacteria

The stream of water is so forceful that it removes not only the grease, soap, and scum build up, but also any bacteria that settle in your drains from your kitchen or bathroom, resulting in a myriad of problems. If you’re experiencing foul smells from your drains, Hydro-Jetting can help address that issue and leave your drain pipes clean and fresh.

Environmentally safe

A single pipe cleaning with a Hydro-Jetting system can delay the need for another service call to clear blockages or tree roots up to four times longer than a typical procedure with a mechanical snake. This reduces sewer service expenses over the long term.

Unlike conventional snake-type cleaners that break up debris only to re-clog later on or sometimes harmful and dangerous liquids are used, jet water removes the clog completely, safely, preventing self-healing clogs of substances such as grease from re-forming and in a very environmentally safe. While traditional drain cleaning should be done a minimum of two times a year, HydroJetting in Northridge is so detailed that it secures your pipes against clogs for several years, saving you money in the long run.

So, these are some of the benefits of using hydro jetting method for cleaning the pipes or sewer lines.

What do you think about this blog? Please share your thoughts with us in the comment section below.

Continue reading →

Tips to Unclog Your Kitchen Sink Drain

It can be a helpless feeling when the kitchen sink won’t drain. With water backing up and a counter full of dirty dishes waiting to be cleaned, it may be tempting to reach for the phone and dial the plumber. Before you do, read these easy, do-it-yourself ways to unclog that drain.

Boiling water

This is the easiest and least expensive solution of all, which makes it the best one to try first. Place a kettle or pot of water on the stove and bring to a rolling boil. While you’re waiting for the water to heat, remove as much standing water from the sink as you can, using a mug or small pot to bail out the water.

Then, pour the entire kettle of water into the sink and wait. If the water stands in the sink and the clog doesn’t move, give the water time to cool and remove it to try again. You may need to repeat the process several times to move the clog, but this often works on many types of stoppage.

Disposal

Check to make sure it’s not your garbage disposal that's causing the problem. A clogged disposal can stop up the drain cleaning in Northridge, so run the disposal to see if that clears the clog. Then inspect it to make sure it’s running correctly. If the disposal has overheated, you may need to flip the switch found on the side or bottom of the unit underneath the sink.

Vinegar and Baking Soda

Again, remove standing water first. Pour about a cup or so of baking soda into the drain, followed by an equal amount of white or apple cider vinegar. The solution will bubble, but when they subside, put the stopper in and wait about 15 minutes. Next, run hot water to see if the clog clears. Repeat if needed.

Salt and boiling water

After removing standing water from the sink, pour about ½ cup of table salt down the drain before you pour in the boiling water. Let it sit for a few minutes, and then flush with hot water to clear the mixture.

Plunger

If these combinations aren’t successful in drain cleaning in Chatsworth, reach for a common household plunger. If you have a double sink, first seal off the second side with a wet cloth or a stopper. You’ll need to create a tight seal around the plunger, so fill the side of the sink you intend to plunge with enough water to cover the bell of the plunger. Place the plunger firmly over the drain and plunge vigorously several times. When you hear the suction clear the clog, remove the plunger and flush the drain well with warm water.

Baking soda and salt

This is another combination that can work on sink clogs. Mix about a cup of baking soda with a half-cup of salt, and pour down the drain. Let the mixture sit for several hours, then flush with boiling water. You can repeat this process if it doesn’t work the first time.

So, these are some of the tricks that you should use to get an easy clog-free kitchen sink. Good Luck!

Continue reading →

Here is How You Can Get Best Local Plumbing Contractors

Running a business certainly isn’t for the faint of heart. There are several factors that go into making sure your workforce is comfortable and has everything to do their job accordingly.

While many people may not realize it, your company’s plumbing situation is of vital importance. Not having it up to speed can mean things like stoppage in work, leaks, slippery spots, and even flooding. None of those results are ideal, so you want to make sure to have a trusted plumber ready to repair any obstacles.

Here’s a guide to hiring plumbing repair services in order to find the best fit for your organization’s needs.

Check reviews

You can learn a lot about any business that your company hires by simply checking the online reviews on each service. Finding professional local plumbing services is no exception.

If you find any formal complaints on a plumbing company, you should pull them from the list of considerations. Granted, you should take most online reviews with a grain of salt. But that doesn’t mean that the review doesn’t hold a bit of truth that you should be wary of.

Instead, look at the reviews as a whole. Are they relatively positive and satisfied? Are there any complaints that are consistent and repetitive? These answers should all be considered.

Check whether the company has license?

Many people may not realize that several states, if not most of them, require professional plumbers to be licensed in order to legally perform a service. Simply put, if they aren’t properly licensed, but are required to by your state, then you should show them the door. Using a plumbing repair service that doesn’t have a license will result in serious consequences.

However, if your state doesn’t require them to be licensed, you should still do a fair amount of research before hiring them.

How long they have been in business?

Experience is great, it’s important, but it isn’t the only significant factor of the service you want to partner up with. It’s just as important to find out how long they’ve been in business.

Knowing how long that business has been running will speak to the quality of service you can expect.

For example, you might run across a company that’s just started up, but the owner has over 25 years of plumbing experience. While he/she may know everything there is to plumbing solutions, their business is still in its infancy. Paying for the company’s services may lead to a lack of communication, less-than-ideal service times, invoice dilemmas, or other setbacks to you as the customer.

Do they have insurance?

Even the most experienced and savvy of local plumbing contractors can be susceptible to an injury, mistake, or incident while on the job.

If they aren’t properly insured, it could lead to a financial burden on your company, their company, or both. Not a situation that you’ll want your small or large business to get caught in.

That’s why it’s important to make sure the plumbing repair service you use has insurance for both you and their plumbers. It will protect you from unforeseen accidents.

Continue reading →

Here is Why You May Need Hydro-Jetting Services!

Clogged drains getting you down? Chances are your first course of action will be to reach for the nearest chemical cleaner. We advise you not to. Thinking about using anti-clogging cabling? Again, don’t; unless you’re a professional plumber that is, or you might find yourself in more hot water than what you’ve started with.

There are different methods that you can try to address a plumbing issue like this and one of the best options is hydro-jetting; especially if you’re dealing with more complex clogging concerns.

What is Hydro-Jetting?

Plungers and snakes can normally work for minor clogging issues, but when you need to clear out debris, something stronger might be necessary. Hydro-jetting involves the use of high pressure water to clear out whatever it is that’s blocking your drains or sewer system.

With hydro-jetting services in Chatsworth, you won’t only be unclogging the pipes but it will also clean them thoroughly. The water stream is strong enough to remove debris, clear out grease deposits, sediments, tree roots and other build-ups. If you have an outdoor pipe system, which are normally susceptible to root growth, the tool will also help clear out the organic material saving you thousands in potential repair work.

Reasons why you may need Hydro-Jetting services

There are different reasons behind why you should consider obtaining our hydro-jetting services. For one, you might be dealing with major blockage. There are also times when clogs results from a grease buildup.

Again, most consumer-grade chemicals don’t have the ability to remove these types of build-ups. A hydro-jet however comes with a tank, engine, pump, and hose setup that deliver a high-pressure stream of water that can easily blast the buildup away. As an added bonus, you’ll end up with squeaky-clean pipes too.

Hydro-jetting may also be the solution you’re looking for if the buildup lies in a section of your pipe system that’s not easily accessible. Especially when they’re in nooks and crannies, the only way to get to them is to hose them down with 7 to 60,000 PSI of force.

As hydro-jetting clears and cleans the pipes, you can also use it to prevent clogging in the future. Think of it as preventive maintenance. By not only reducing the buildup but removing it altogether, it’s less likely that you will experience clogging problems anytime soon. Professional local plumbers in Chatsworth make sure of it by running a camera line through the system before and after the process.

Lastly, hydro jetting can lend to a cleaner environment for your family. It comes as no surprise that your plumbing and pipes are a breeding ground for all sorts of bacteria. If you have ever noticed an unusual smell coming from your plumbing, it is probably due to the build-up of some pretty unsavory stuff. Hydro jetting clears out the grime that is trapped in your pipes and contributes to a more sanitary plumbing system overall.

So, the next time you encounter clogged drains and pipes, think about hydro-jetting as a viable pipe and drain cleaning solution.

Continue reading →

Try these Home-Made Drain Cleaners!

What is the first thing that comes to your mind when the drain or pipe in your home is blocked? Do you feel like calling a plumber? Do you rush to grab a chemical drain cleaner? Do you use a plunger? Well, I am sure there may be more than thousands thoughts going on in your mind, but you may have never thought to unblocking the clog with items available in your kitchen!

Calling for plumbing services in west Hills CA is really stupid as it is small issue which you can solve all by yourself, if you know the tricks! Plumbers on other hand will charge bomb for even a small plumbing issue.

So, what are you waiting for? Here are some of the top DIY methods that can remove the clogging issues at your home forever!

Soap and Hot water

Boil about two liters of water and mix in a few tablespoons of liquid dish soap. Take this mixture and slowly pour down the sink.

This method may take a few tries, but it will work great on grease clogs because it is heating the grease back to a liquid so it can travel all the way out of the pipe.

Use cloth hanger

Straighten the hanger out but leave the hook. Make sure you have a grocery bag or something to discard your findings.

Use the hook end of the hanger to fish in the drain and pull up any food or hair buildup that is clogging the passageway in the pipe. After removing as much as you possibly can, run hot water down the sink.

Baking soda and vinegar

 Clear the area around your sink and put a 1/2 cup of baking soda down the drain. Follow that with a 1/2 cup of vinegar. Now plug your drain and let it sit for an hour.

Then, unplug the drain and pour a pot of boiling water down it. Continue pouring boiling water down the drain until it is clear.

Salt and vinegar

Start with 1/4 cup of salt, 1/4 cup of Borax, and then a 1/2 cup of vinegar. Add a pot of boiling water and let it sit for at least an hour or until it clears. Finally, rinse with hot tap water to clear all ingredients down the drain.

  

Baking soda and salt

Mix salt and baking soda together. About a 1/2 cup of each and pour down the drain. Let it sit for a minimum of a half hour or as long as overnight. Once it has a significant time, clear it with a pot of boiling water.

Use a plunger

This tactic is mainly for the kitchen sink. Food gets stuck at the curve of the drain under the sink where it's hard to reach with a hook, so try a plunger to clear it. First, empty your sink of any dishes or rags. Fill the sink halfway with warm tap water and plunge away. Plumbers in west Hills CA recommend rubber plunger.

So, these are some of the DIY methods from it items available in your kitchen that can help you unclog the drain without having to spend a single penny.

Continue reading →

Horrifying Plumbing Scams you Must Know About!

Like in any other profession, plumbing scams is also one in which if you are not smart and aware enough, you are going to get cheated and out of money.

Since the plumbers are most wanted and literally have a very tight schedule, they know their importance and although not generalizing but many of the plumbers use this opportunity to pull a lot of scams and rob their clients out of lot of money.

In this Blog, I will list down a list of most common scams that you must be aware of!

Bait and switch scam!

The bait and switch is a popular scam that involves plumbing services in West Hills CA convincing you that you’re getting the best of the best when, in reality, they’re installing an inferior, lower-cost product. Then they pocket the profit. Another tactic might be to use the expensive materials but jack the price up way higher than it should be.

Three is a crowd

You hired a plumber to come work on an issue, but throughout the week you’ve had three different people show up, and you have no idea what they’re all doing. Sometimes one of these people is an apprentice. This is not unheard of, but note that an apprentice should always be monitored and have their work checked by a licensed plumber. To spot the scam, keep an eye on one or two things:

• Some plumbers will subcontract parts of the job to family or friends and then claim they have no control over the other people’s hourly rates when it comes time to write the bill.

• If there are three plumbers on the scene where the job only requires one, you could end up paying three hourly wages.

A fraud plumber

A respectable plumber shouldn’t have any issue producing their credentials, plumber license number, and business cards if asked. If they’re a bit reluctant to show you, it may be that they don’t have that crucial information. Two other big no-nos are cash-only jobs and under-the-table payments. This also includes no written receipts. Often, this indicates that the plumber is not paying taxes or even carrying insurance.

Another red flag is the plumber asking for 25% to 50% upfront. This is actually one of the most common scams listed on the Better Business Bureau (BBB). Most states have laws that prohibit plumbers from asking for more than 10% upfront. If the plumber requests a high amount upfront, they could take the money and run.

Unstable estimates

The ever-changing estimate can take a few turns, and there are quite a few ways to run this scam. One involves the shady plumber companies in West Hills CA going through the issues, calculating a “running total” in their head, but offering no numbers on paper. When you ask for an estimate, they say they’ll “get back to you.”

Over the phone, they give you an amazing estimate, so you jump on it, and they promise to deliver the written quote as soon as possible. After they start the work, there’s still no paperwork. Before you know it, they’re done, and the price has jumped two or three times higher than the spoken estimate!

Continue reading →

DIY Tricks for Maintenance of Water Heater

Hot water is like the most important thing for me when I get up in the morning. It gives me what I need for a fresh start. If do not get hot water in the morning, then it is a deal-breaker for me.

No, it is a serious issue if your water heater is not giving hot water, then you can call a plumber to get fixed, but you will glad to know that there are a lot of issues related to a water heater that is minor and you can fix it by yourself.

In this blog, I will discuss some of the smart tricks on how you can troubleshoot some of the minor issues related to the water heater and repair it yourself, rather than paying a plumber for water heater repair in Woodland Hills.

DIY Method of repairing the heating element of the water heater

Locate the heating element by removing the access panels on the water heater. Detach one of the wires from the heating element and set the multi-tester to read a resistance of 1000. Touch one of the probes to the terminal screw on the heating element and another probe to the element’s mounting bolt. When the reading is zero and not infinity, it is time to replace the element with a new one.

To replace the element, drain the entire water tank first. Remove the element by detaching the mounting bolts holding it into position. Insert the new element and wire it correctly to the heater by following the appropriate steps detailed in the manual. Make sure to replace any installation gaskets as well.

DIY Methods for repairing valves

Inspect both the relief and drain valves for any sign of damage. The relief valve should have a spring lever that can be lifted to check for water flow. Lift the lever and check for water flow. When the relief valve does not spew any water or only allows a few drips to come out, then it needs to be replaced. Check the drain valve as well to see if it has any leaks or damage.

To repair leaks, simply remove the valves from their location using a wrench, remove the pipe tape on the male threads and wrap the new tape at least three times.

DIY Method for repairing a thermostat

Obtain a service manual for the water heater replacement in West Hills and use it as a reference when looking for specific parts. Locate the thermostat and gain access to it. This may require removing the water heater access panel. Remove the wires on the thermostat to prepare it for continuity testing. Use the wiring diagram on the service manual to locate the thermostat terminals. Turn the multi-tester to read resistance. Touch the probes of the tester to the terminals of the thermostat. If the reading is infinity, it is still functional. If the reading is zero, make sure to purchase an exact replacement and install it.

So, these are some of the DIY methods of maintaining and troubleshooting some of the common issues of the water heater.

Continue reading →